Sliding Patio Door Repairs
A sliding patio is an excellent way to enjoy your outdoor space and let in more light. But, if the door isn't functioning smoothly or appears dingy it can be a real pain.
Luckily, the majority of these issues can be fixed with a bit of DIY expertise. Here are a few common issues and their solutions:
Tracks that are damaged or dirty
Over time, the tracks of a sliding patio could become clogged up with dirt, dust and other debris. Adding a regular cleaning routine and lubrication will ensure that your door will move smoothly.
A dirty track can make the door stick or even make it impossible to open or close So the first thing you need to do is clean it. Begin by sweeping off any loose debris. Then, use a cleaning solution and brush to clean away any visible grime. Be sure to go into the nooks and crannies and also any areas where the door connects to the frame.
After you've scrubbed the track, rinse it off by using an hose or bucket of clean water. Apply lubricant from a store to prevent rust and displace moisture. Before you reinstall the door try sliding it back and forth to determine if it moves freely.
If your door still sticks, it could be that the rollers are damaged or misaligned. This can cause the door to move slower. In most cases, you can fix the issue by adjusting the wheels and lubricating. If your door is old, it might be the time to consider a replacement. Before reassembling the track lay a drop cloth on the floor. Then remove the two plugs that cover the screws for adjustment of the rollers at the bottom of the frame. Put a screwdriver into each hole and turn them counterclockwise to pull the rollers back. This will allow you the space you'll need to take out the door and set it on sawhorses.
A faulty handle
In time the handle of your sliding door can be loosened from the strike plate that it is connected to. The good part is that a loosened handle can be easily fixed. Use a screwdriver to tighten the screws that hold the door handle to the strike plate. However, be careful not to tighten too much as this can harm the mechanism within and result in the handle not to longer function properly.
The problem of a sliding patio door that isn't easy to slide is typically caused by debris blocking the rollers. Dirt, hair and other particles frequently get stuck in the tracks, which causes the door to stop smoothly sliding. Begin by cleaning the rollers and using a sliding door lubricant that will ensure smooth operation.
Another common issue is when the lock on your patio door stops working correctly. It could be caused by the lock being misaligned or having damaged handle. The lock mechanism could be replaced or the handle realigned.
A screen door that doesn't close or unlock isn't an enjoyable experience. A faulty screen door can also be dangerous. If the screen isn't aligned properly with the door frame, it will rub against frames and result in wear and tear on both the screen and the door. If your screen doesn't function correctly, the solution is pretty easy. First, make sure that the latching rod is still in the correct position. If not, take it out and replace it with a brand new one. After you've replaced the latching rod, reinstall the screen and make sure the hinges are properly set. For a finished look make sure you attach screw covers to the holes in the frame.
Poor weatherstripping
The weather stripping on your frame and door helps to seal the gap, keeping out drafts, cold air and insects. If yours is damaged, cracked or discoloured it's time to replace it. It's usually fairly easy to do. Some people cut off the worn section and replace it, but it's easier to replace the whole part.
First, check that the gap isn't near the seating point where the weather strip is bonded to the frame. If it is, you'll have to reattach it to the frame with weather strip adhesive.
Next, check the entire perimeter of your weather strip. Use your dollar bill to determine whether the weather strip is sealed. Simply place the bill half way across the seal and close the door to check if it easily pulls away from the flange of metal of the weather strip. If it's simple to do you're ready to replace it.
You may also have to lubricate your run channel (the groove made of rubber and felt that runs vertically along both sides of your door) to prevent the accumulation of ice during winter. You can buy a spray lubricant at your local hardware store that works, but be careful not to get any on the glass.
Spreading a thin layer of sand beneath your door will keep it from sticking, much as salt. You should not leave sand at the lower part of your door since it will damage the rubber and concrete of the weather strip.
Glass damaged
There are a variety of situations that can result in the glass of a sliding patio door becoming cracked or shattered. If your glass for your patio door is damaged due to a knock or bump, or any other cause, it is vital to replace it right away to ensure that your home is well-insulated and sealed.
Sliding doors can be damaged over time due to their regular use and exposure. sliding patio door repair near me that aren't working properly can be caused by rusty rollers, damaged handles or bent tracks. Sliding patio door repair specialists are able to quickly identify the cause of the problem and perform any necessary repairs or replacements.
A broken patio door can impact your energy costs in addition to the obvious damage. The presence of drafts and noticeable temperature variations around the patio door are often indications that a gap is present between the frame and the glass pane. This can be costly in the summer and winter when you must pay for heating or cool your home.
It is possible to replace a broken glass panel on your sliding patio door without having to take out the entire door. In certain situations, this is the best option for you if you want to get your door back functioning as quickly as possible. No matter if you are replacing the glass or the frame, it's essential to have the proper tools on hand to ensure the task can be done quickly and safely. This includes gloves and a small hammer or pry bar, a putty blade as well as a measuring tool and a replacement glass. DIY Door Store offers all these items to help you fix your broken sliding patio doors quickly and easily.
Frames that aren't secured or damaged
Sliding patio doors are designed to simplify access to the outdoors and indoors, and also allow for a natural flow of traffic. Like any other home appliance sliding patio doors are prone to wear and tear that can impact their performance. Some damages are easy to fix, while others require expert assistance to keep your door in good condition.
The visible signs of damage like scratches and dents suggest it's time to consider sliding door replacement. These damages affect the security and energy efficiency of your patio door as well as its appearance.
A roller or track that is not aligned is common causes for your sliding door to stop functioning correctly. This is usually caused by dirt or debris accumulation on the track and can usually be resolved by using a pair of pliers to straighten out the rails.
It is crucial to clean the rollers and tracks of your sliding patio doors, because dirt can cause rigid or sticky doors that can't slide smoothly. You can get rid of any obstructions by using hand-brushes, vacuums or even spraying down using jetwash. Use a silicone-based grease on your tracks to ensure smooth operation and prevent premature wear.
In time, slamming the patio door can cause severe damage to the frame and the glass panel. This can result in damaged or loose frames, bent tracks and a handle that is difficult to open and close. Sliding screen doors are generally more prone to this kind of damage since frames are usually less sturdy than those on glass sliding doors. If you do have damaged screen door frames it is usually repaired by sealing the gap with silicone lubricant and applying new sealant around the edges of the glass.